*** Ebay Authorised & Approved UK Seller for “Vaporiser and E-Cigarettes” categories ***
Buy genuine products with confidence at Ecig Switch
“I have an effective age verification process that satisfies due diligence as described in the Business Companion guide for online age verification checks and I will not sell to persons that are under 18 years old”
Electronic Cigarette starter Kit
Kit Contains:
- 900mAh Variable Voltage Battery (choose your preferred colour from drop down box)
- Kangertech T3D Clearomiser (we will ensure colour provided will compliment your battery colour choice where possible)
- USB Charging Cable
Product details:
Battery
The Ego Twist has adjustable power output from 3.2 volts right up to 4.8, well beyond the output of the standard factory setting on non-adjustable batteries. In addition; like most of our products, the device can safely be switched off with five clicks of the power button and also comes with a safety cut off feature. If you accidentally press the button for 10 seconds the power will cut off automatically for your safety. The battery has a capacity of 900mAh which should see most vapers safely through the day before recharging is required.
To switch the battery on, just click the button rapidly 5 times and the light should flash. Use the same process to switch the battery off (which is highly recommended when putting the ecig away in your pocket or bag to avoid it burning out your coil)
Please Note: The safest way to charge your battery is to plug the USB cable into a computer/laptop/games console (Xbox) etc. It should take around 2-3 hours to fully charge when totally flat (we recommend you charge only when completely flat, to prolong the life of your battery) You should get an average of 300 recharges if used this way.
This size of Ecig battery is not suitable for charging with 1A+ (1000mAh) mobile phone usb plugs as the output is too high.
Should you use a USB wall plug, 30-500 mAh output is best – it takes longer to charge but is safer and will give you the best life expectancy of your battery.
Tank
The kit comes with a Kangertech T3D clearomiser/tank which has a replaceable coils. To fill the Kangertech T3D all you have to do is turn the tank upside down and unscrew the base that has the coil screwed into it.
Holding the tank at a 45 degree angle, pour your E-liquid into the tank down the sides, avoiding the metal tube in the centre.
The dual coil system provides a decent vapour production and delivers a smooth taste. The tank can also fit on almost every battery that has a 510 threading or by using a 510 thread adapter. We suggest you give the coil a tighten onto the base each time you refill, as they can sometimes work themselves loose.
We also sell the replacement dual coils for this tank (see our other listings) in resistances of 1.8ohm and 2.5ohm
Charger
Also included with the kit is a USB charging cable. You can plug the USB into a computer/laptop/games console etc (see above for warning regarding the use of mobile phone plug adapters) Remove the tank from your battery, and screw the battery into the charger. The light on the charger will show as red whilst charging, and turn green once fully charged. Your battery will stop charging once full. The process should take around 2-3 hours depending on what it is plugged in to.
All you need to get started is eliquid – check out our other items for some tasty flavours!